1. DOA is the typical cold-resistant plasticizers with high plasticizing efficiency. Its color changes slightly when heated. It is suitable for PVC,EVC, palystyrene and synthetic rubber resins.
2. It can make downstream products soft even at low temperature, having good
light-resistance and hand-feeling.
3. It is usually been used with the main plasticizer DOP and DBP for the production of
cold-resistant agricultural thin film, frozen foods packaging fillm, coating layer of wire and cable, artificial leather, board, outdoor water pipe, etc.
4. In the application of plasticized paste, could make the paste's initial viscosity low and stable. DOA's high volatility makes it weak in waterproof, transference and insulation.USA,France,Italy, Japan and Netherlands permit this product to be used in the foods packing materials.

DOTP, as the main plasticizer, has excellent electrical properties, good cold resistance, heat resistance, and pull-out resistance, and high plasticizing efficiency. Suitable as a plasticizer for polyvinyl chloride resin, such as high insulation polyvinyl chloride cable material, can be used as a plasticizer for 70 ºC wire and cable materials, PVC soft products plasticizer (polyvinyl chloride film, hose), artificial leather film plasticizer, etc. This product can be mixed with DOP in proportion to reduce viscosity and increase shelf life when used for plasticizing paste. It can be used as a plasticizer for acrylonitrile derivatives, polyvinyl butyral, nitrile rubber, synthetic rubber, as a coating additive, precision instrument lubricant, lubricant additive, and paper softener.

Dibutyl phthalate DBP
Dibutyl phthalate is the most commonly used plasticizer for polyvinyl chloride. It can make products have good flexibility, but it has high volatility and water extractability, so it has poor durability. Dibutyl phthalate is an excellent plasticizer for nitroce-llulose with strong gelling ability. It is used in nitroce-llulose coatings and has a good softening effect. Stability, flexibility, adhesion and water

resistance are better than other plasticizers

1.DPHP is a clear, colorless, and almost odourless liquid.
2.DPHP soluble in most organic solvents and miscible and compatible with all of themonomeric plasticizers commonly used in PVC
3.DPHP is provides to the vinyl formulator a primary monomeric plasticizer,excellentthermal stability and electrical properties permanence ; low volatility
4.DPHP is recommended to be used in high temperature heat aging resistance is re-quired cable and wire, refrigerator gasket, and washable sheet.
5.DPHP suited for applications requiring low volatility such as interior automotive ap-plications, it offers good resistance to extraction and excellent resistance to UV light.
6.DPHP posseses aromatic character which provides solvency for coating applications.

1.This product is a kind of non-toxic odorless safe plasticizer, with excellentheat-resistance, cold-resistance, light-resistance and water-resistance performance,suitable for the foods packaging, children's toys, and medical products and so on. USAF.D.A approves it to be used in meat packaging material and also children's toysmaterials,
2. Based on the good performance of this pro duct, it is used in the production of fresh meatpackaging, dairy product packaging,PVC medical product, chewing gum on a large scale.The resins after the plasticizing of ATBCwill present good transparency and flexureresistance in low temperature. At the meantime, ATBC has low volatility and lowextraction,stable while heat-seal and do not change color.3. The lubricating oil made from this product also has brilliant lubricating property.

Plasticizer

TOTM is a kind of heat-resisting, durability-resisting plasticizer, suitable for PVC resins, nitro cellulose resins, P MMA resins, etc.
This product behaves well in volatility resistance, extraction-resistance, transference resistance, low temp. resistance, high temp. resistance and electrical property.

Dibutyl phthalate DBP
Dibutyl phthalate is the most commonly used plasticizer for polyvinyl chloride. It can make products have good flexibility, but it has high volatility and water extractability, so it has poor durability. Dibutyl phthalate is an excellent plasticizer for nitroce-llulose with strong gelling ability. It is used in nitroce-llulose coatings and has a good softening effect. Stability, flexibility, adhesion and water

resistance are better than other plasticizers

1.DPHP is a clear, colorless, and almost odourless liquid.
2.DPHP soluble in most organic solvents and miscible and compatible with all of themonomeric plasticizers commonly used in PVC
3.DPHP is provides to the vinyl formulator a primary monomeric plasticizer,excellentthermal stability and electrical properties permanence ; low volatility
4.DPHP is recommended to be used in high temperature heat aging resistance is re-quired cable and wire, refrigerator gasket, and washable sheet.
5.DPHP suited for applications requiring low volatility such as interior automotive ap-plications, it offers good resistance to extraction and excellent resistance to UV light.
6.DPHP posseses aromatic character which provides solvency for coating applications.

1.This product is a kind of non-toxic odorless safe plasticizer, with excellentheat-resistance, cold-resistance, light-resistance and water-resistance performance,suitable for the foods packaging, children's toys, and medical products and so on. USAF.D.A approves it to be used in meat packaging material and also children's toysmaterials,
2. Based on the good performance of this pro duct, it is used in the production of fresh meatpackaging, dairy product packaging,PVC medical product, chewing gum on a large scale.The resins after the plasticizing of ATBCwill present good transparency and flexureresistance in low temperature. At the meantime, ATBC has low volatility and lowextraction,stable while heat-seal and do not change color.3. The lubricating oil made from this product also has brilliant lubricating property.

1. DOS is an excellent cold-resistant plasticizer,with high plasticizing efficiency, high stability and low volatility. Except good cold-resistance, it also has good heat-resistance light-resistance, electric and insulation,suitable for PVC,EVCpolystyrene and synthetic rubber resins.
 
2. Especially suitable for the production of cold-resistant wire,cable material, luxury food, meat plastic wrap, artificial leather,thin film,conveyer beltboard,sheet,etc. Usually be used with PA esters.
 
3. As the low-temperature plasticizer for synthetic rubbers, DOS has no effect on the vulcanization of rubber.

Plasticizer

1. DOA is the typical cold-resistant plasticizers with high plasticizing efficiency. Its color changes slightly when heated. It is suitable for PVC,EVC, palystyrene and synthetic rubber resins.
2. It can make downstream products soft even at low temperature, having good
light-resistance and hand-feeling.
3. It is usually been used with the main plasticizer DOP and DBP for the production of
cold-resistant agricultural thin film, frozen foods packaging fillm, coating layer of wire and cable, artificial leather, board, outdoor water pipe, etc.
4. In the application of plasticized paste, could make the paste's initial viscosity low and stable. DOA's high volatility makes it weak in waterproof, transference and insulation.USA,France,Italy, Japan and Netherlands permit this product to be used in the foods packing materials.

Dibutyl phthalate DBP
Dibutyl phthalate is the most commonly used plasticizer for polyvinyl chloride. It can make products have good flexibility, but it has high volatility and water extractability, so it has poor durability. Dibutyl phthalate is an excellent plasticizer for nitroce-llulose with strong gelling ability. It is used in nitroce-llulose coatings and has a good softening effect. Stability, flexibility, adhesion and water

resistance are better than other plasticizers

1.DPHP is a clear, colorless, and almost odourless liquid.
2.DPHP soluble in most organic solvents and miscible and compatible with all of themonomeric plasticizers commonly used in PVC
3.DPHP is provides to the vinyl formulator a primary monomeric plasticizer,excellentthermal stability and electrical properties permanence ; low volatility
4.DPHP is recommended to be used in high temperature heat aging resistance is re-quired cable and wire, refrigerator gasket, and washable sheet.
5.DPHP suited for applications requiring low volatility such as interior automotive ap-plications, it offers good resistance to extraction and excellent resistance to UV light.
6.DPHP posseses aromatic character which provides solvency for coating applications.

Application Guide: Mainly used to PVC, and also widelyused to toys' flm, wire and cable since DINP has good water proofng, extraction resistance, electric insulating property and low-poisonousness. Application areas: Industry thin-hlm, waterproof cloth, layer sheet, ground covering, wallpa-per, cable batch, special type hbre, artifcial leather binder, coating, solvent,packaging flm, tube stock and sectional materials.

Plasticizer

1. DOA is the typical cold-resistant plasticizers with high plasticizing efficiency. Its color changes slightly when heated. It is suitable for PVC,EVC, palystyrene and synthetic rubber resins.
2. It can make downstream products soft even at low temperature, having good
light-resistance and hand-feeling.
3. It is usually been used with the main plasticizer DOP and DBP for the production of
cold-resistant agricultural thin film, frozen foods packaging fillm, coating layer of wire and cable, artificial leather, board, outdoor water pipe, etc.
4. In the application of plasticized paste, could make the paste's initial viscosity low and stable. DOA's high volatility makes it weak in waterproof, transference and insulation.USA,France,Italy, Japan and Netherlands permit this product to be used in the foods packing materials.

TOTM is a kind of heat-resisting, durability-resisting plasticizer, suitable for PVC resins, nitro cellulose resins, P MMA resins, etc.
This product behaves well in volatility resistance, extraction-resistance, transference resistance, low temp. resistance, high temp. resistance and electrical property.

Plasticizer